My contact person
e-chains®, chainflex®, cables, harnessed systems readychain®

Mohamed Abd Elfatah

+20 2 25767370
Photo
dry-tech® bearing technology

Mohamed Abd Elfatah

+20 2 25767370
Photo

drylin® R shaft guides

Components within the drylin® R shaft guides are identically dimensioned as recirculating ball bearings - in contrast, the drylin® R systems minimise noise emissions and reduce surface pressure by the larger contact area between guide and shaft. This allows the use of soft shaft materials such as aluminium or carbon fibre. All in all, the largest range of shafts is available in the programme of shaft linear guides with seven different materials. In combination with three different bearing types made of solid plastic, aluminium or stainless steel as well as five linear liners for different environments, drylin® R is suitable for maximum flexibility and all applications. The unique geometry of the bearing liners ensures a firm hold in the housing by means of a positive locking. This is contrary to glued or pressed solutions even under extreme conditions such as temperature, pressure, impacts and water. As required, a quick replacement of the individual linear liner is also possible.
 

Products

Number of products: 65

drylin® R - aluminium shaft, solid/hollow shaft, AWMP
  • Lightweight
  • Ideal in combination with liners made from iglidur® J/J200
  • Low wear of plain bearings
  • Corrosion-free
  • Aluminium EN AW 6060/6061 (ALU)

from 28.99 USD/m

To the product page
drylin® R - liner JUM-01
  • Material: iglidur® J for all shaft surfaces in indoor and outdoor use 
  • Version: enclosed housing, long design

from 3.94 USD/Pc.

To the product page
drylin® R - aluminium shaft, supported, AWMU, EN AW 6061/6060
  • Lightweight
  • Ideal in combination with liners made from iglidur® J/J200
  • Low wear of plain bearings
  • Corrosion-free
  • Aluminium EN AW 6060/6061 (ALU)

from 72.85 USD/m

To the product page
drylin® R - liner JUM-02
  • Material: iglidur® J for all shaft surfaces in indoor and outdoor use
  • Version: Enclosed, short design 

from 3.30 USD/Pc.

To the product page
drylin® R - linear slide bearing RJ4JP-01
  • Alternative to ball bearings with Japanese dimension
  • Quick assembly
  • Secured by circlips
  • Plain bearing material: iglidur® J4

from 2.28 USD/Pc.

To the product page
drylin® R - stainless steel shaft, EEWM, 1.4034
  • High corrosion resistance
  • High chemical resistance
  • Ideal solution for wet applications
  • Stainless steel EEWM 1.4034 (X46)
drylin® R - linear slide bearing RJUM-01
  • Secured by circlips
  • Enclosed anodised aluminium adapter
  • Material of the liner: iglidur® J

from 9.61 USD/Pc.

To the product page
drylin® R - liner J200UM-01
  • Material: iglidur® J200 
  • Version: Enclosed housing, long design 

from 4.73 USD/Pc.

To the product page
drylin® R - steel shaft, SWM, 1.1213
  • Cost-effective standard
  • High load capacity
  • Dry area applications
  • Low coefficient of friction against plastic bearings
  • 1.1213 (Cf53) steel
drylin® R - liner E7UMO-01
  • Material: iglidur® E7 
  • Version: long, open design 
drylin® R - linear slide bearing OJUM-01
  • Open anodised aluminium adapter
  • For supported shafts
  • Material of the liner: iglidur® J

from 12.56 USD/Pc.

To the product page
drylin® R - liner XUM-01
  • Material: iglidur® X 
  • Version: Enclosed, long design, high temperature 
  • Resistant to temperature and chemicals on stainless steel and chromed shafts

from 8.51 USD/Pc.

To the product page
drylin® R - linear slide bearing TJUM-01
  • Split anodised aluminium adapter
  • Quick replacement of bearing liner without dismantling the shaft
  • Material sliding element: iglidur® J

from 25.94 USD/Pc.

To the product page
drylin® R - quad block RQA-01
  • Material sliding element: iglidur® J
  • Design: closed design

from 63.32 USD/Pc.

To the product page

Consulting

I would be happy to answer your questions personally

Shipping and consultation

In person:

Monday to Friday from 7 am - 8 pm.
Saturdays from 8 am- 12 pm.

Online:

24h