iglidur® V400, sleeve bearing, mm - V400SM

iglidur® V400 | For soft shafts, up to +200°C
Highly wear-resistant bearings for soft shafts and temperatures up to +200°C with low moisture absorption and very good chemical resistance.

Typical application areas

Vending machinery
Automotive
Aviation
Heavy machinery / plant engineering

You can find further possible applications here:
Industry solutions
 

When to use it? When extreme wear resistance is required with soft shafts When the highest wear resistance at temperatures above +100°C is required When vibrations and edge loads are present When the bearing should be resistant to chemicals

When not to use it? If hardened shafts are provided iglidur® W300, sleeve bearing, mm When room temperatures prevail iglidur® G, sleeve bearing, mm iglidur® J, sleeve bearing, mm iglidur® W300, sleeve bearing, mm When an inexpensive universal bearing is sought iglidur® G, sleeve bearing, mm

Use our filter options to find the suitable product 

Tolerances and measuring system
The installation dimensions and tolerances of the iglidur® bearings depend on the material and wall thickness. Moisture absorption and thermal expansion are decisive for the material. Plain bearings with low moisture absorption can be designed with a minimal amount of bearing clearance. The following applies to the wall thickness: The thicker the bearings, the greater the bearing clearance must be.
Test procedure

Installation
iglidur® bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing bore. The press-fit interference can be up to 2% of the inside diameter. This ensures the secure press-fitting of the bearing. Axial or radial displacements in the housing are thus reliably avoided.
iglidur® - installation, bonding, machining