Change Language :
iglidur P360 material at a glance

High-performance material iglidur P360B

High noon for UV rays

With P360B, our iglidur P360 material has found a big brother. The B version has all the material advantages of its predecessor and also stands out with high UV resistance. This means that applications in sunny environmental conditions are possible without any problems. Endurance is pre-programmed.

  • High UV resistance
Tech up
  • Improved service life in sunlight extends maintenance intervals and is easy on the wallet
Cost down
  • Successful weathering tests at 1,000h run time: iglidur P360B is significantly less sensitive to UV radiation than P360
Proof
  • No additional lubrication is required due to the incorporated solid lubricants
Sustainability
Buy UV-resistant plastic coating here

Material data

General properties
  • Density: 1.24g/cm3
  • Colour: black
  • Maximum moisture absorption at 70°C and 62% r.h.: 0.8% weight
  • Maximum total moisture absorption: 2.9% weight
Mechanical properties
  • Elastic modulus: 1600MPa
  • Flexural strength: 60MPa
  • Maximum recommended surface pressure at room temperature: 26MPa
  • Shore D hardness: 74
Thermal properties
  • Upper long-term application temperature 1.2): 110°C
  • Upper short-term application temperature 1.2): 130°C
  • Upper short-term ambient temperature 1.2): 140°C
  • Lower application temperature: -30°C
Electrical properties
  • Volume resistivity: 1013Ωcm
  • Surface resistance: 1013Ω
  1. Relaxation not excluded
  2. Without additional load; no sliding movement

Consulting

I look forward to answering your questions

International company for Electrical Engineering (I.E.E.) (commercial manager)+201144146285Write e-mail

Shipping and consultation

In person:

Monday to Friday from 7 am - 8 pm.
Saturdays from 8 am- 12 pm.


Online:
24h

WhatsApp-Service:
Montag – Freitag: 8 – 16 Uhr