fixed end module | Quick and easy mounting in the steel guide trough

Until now, the steel channel had to be adjusted on site when installing the mounting bracket at the fixed end. This is now a thing of the past. Thanks to the prepared holes, the 2000 mm long component can be used for centre-fixed, end-fixed and twin-opposing.

1. quick screwing of the mounting bracket through prepared hole
2. quick attachment of additional C-profiles
3. quick screwing of glide bar
Industries: Power stations, coal conveyor systems, mines, open-cast mining, composting plants, raw material storage facilities, gypsum plants and many more...

= guide rail
= glide bar
= installation set
= e-chain® outer width
= e-chain® inner width
= e-chain® outer height
= channel inner height
= trough outer height
= trough inner width
= trough outer width

One-piece steel guide troughs are available for series 10, 15 and B15. They have a continuous glide support in the area of the guide trough with glide bar. These guide troughs are available from stock up to an outer chain width of 60 mm. Customised solutions are available at short notice for the wider e-chain®. No assembly sets are required for these trough sizes, as the guide troughs consist of a one-piece U-profile. The butt joint is solved individually for each application.