guidelite guide trough - cost-effective and fast realisation of travel distances up to 150 m

As a modular system for long travel distances, especially for slow applications with low cycle numbers, the lower run of the e-chain® is guided in two L-shaped guide rails made of glass fibre reinforced plastic. The upper run of the e-chain® is partially guided by guide brackets, which are mounted at intervals of one metre. The correct width can be achieved by clipping crossbars (version01) between the brackets. This makes installation very easy, as no readjustment is necessary. There is also the option of attaching the guide brackets to a C-profile for a wider range of widths (version 02).

Corrosion-free:Completely made of plastic components

cost-effective:Available as a modular system with e-chain®

Time-saving:Easy and quick assembly

2 versions of mounting sets:

With crossbar for a fixed width or with
C-profile for a wider range of widths

Time saving due to quick assembly

Very light thanks to plastic components and quieter than metal guide troughs

cost-effective

corrosion-free

sliding operation: max. Speed 1 m/s

Unsupported operation (guidelite as support tray): max. Speed 5 m/s, higher speeds are not excluded, please contact us if required

Modular system, available from stock

Typical industries and applications

Watering trolleys (watering potted plants)

For applications with a low number of cycles, low speed and additional load

As a favourable support tray for unsupported applications

For the following igus®® series

E2/000

●2500

●2700

●3500

E4.1

●E4.21

●E4.28

●E4.32

Components - Version 01

Guide angle

Plastic guide rail

crossbar, clip-in

Ba = e-chain® outer width
Bi = e-chain® inner width
BB = bar length
A = Angular outer spacing
B = Angular inner distance
(Dimension B must always be 1 to 4 mm
greater than Ba of the e-chain® )

guidlite | Version 01

Part Description

Part No..

installation set with crossbar for a fixed width consisting of

9GL.64.50.450.XX

2 x guide bracket + 1 x crossbar

(XX = width index of the crossbar)

Set of guide rails (left and right)

9GL.64.30.2000

in the specified length (standard: 2000 mm)

Feed module that guides the upper run of the e-chain down®, 2000 mm

9GL.64.80.Serie.450.XX

Only for series 2700R and 3500R rollers e-chain® with centre-fixed

(XX = width index of the crossbar)

Add the width index XX shown in the table on the right to the part no..

Example: 9GL.64.50.450.05

Feed principles

For the following igus®® series

E2/000

●1500

●2500

●2700

●3500

E4.1

●E4.21

●E4.28

●E4.32

Components - Version 02

Guide angle

Plastic guide rail

screw set M8

C-profile

Ba = e-chain® outer width
Bi = e-chain® inner width
BRA = angular outer distance
BRi = Angular inside distance
BRi = Ba + 2
LLL = Length C-profile

guidlite | Version 02

Part Description

Part No..

installation set with C-profile consisting of

9GL.64.50.LLL

consisting of 2 x guide brackets + 1 x C-profile + M8 screw sets

(LLL = length of C-profile)

Set of guide rails (right and left)

9GL.64.30.2000

in the specified length (standard: 2000 mm)

Feed module which guides the upper run of the e-chain down®, 2000 mm,

9GL.64.80.series.LLL

Only for series 2700R and 3500R rollers e-chain® with centre-fixed

(LLL = length C-profile)

Add the length of the C-profile LLL specified in the table on the right to the part no..

Example: 9GL.64.50.175

Feed principles

Consulting

I look forward to answering your questions

International company for Electrical Engineering (I.E.E.) (commercial manager)+201144146285 Write e-mail

Shipping and consultation

In person:

Monday to Friday from 7 am - 8 pm.
Saturdays from 8 am- 12 pm.

Online:
24h

WhatsApp-Service:
Montag – Freitag: 8 – 16 Uhr